ink.line
This fully automatic, traversing ink supply system ensures minimal filling levels in the ink ducts by use of 2 kg ink cartridges.

Ink is added only in those places where it is actually required. This ensures quick ink changes and reduces ink losses.

order brochure
order calculation of profitability






direct ink.line
Combines central ink supply systems and 2 kg ink cartridges.

Ink can be supplied as required, either through the pipes of the central ink supply system or via the cartridge.

As a result, the direct ink.line system offers all the advantages associated with high flexibility.

order brochure







handy.fill
Our comfortable, semi-automatic dispensing system for 2 kg ink cartridges.

The advantages of printing with ink from 2 kg cartridges are obvious: reduced waste ink, shorter ink duct cleaning times, clean working conditions.

A push button replaces the ink knife.

With the handy.fill ink dispensing system, the use of ink cartridges is automated to a great extent.

This user-friendly system is particularly suitable for sheet-fed presses and small format continuous rotary presses.

order brochure



easy.fill
Our starter system for using ink from 2 kg cartridges.

Universally applicable: Available for most cartridge types on all offset presses.

Quick and clean dispensing without an ink knife, minimum unit handling, no time-consuming tin handling, quick ink duct cleaning.

order brochure








ink.mate
The ink.mate distributes the ink evenly over the entire width of the ink duct using an agitator cone and keeps the viscosity of thixotropic inks low, especially in areas with lower ink consumption, such as the edges.

In addition, ink is applied to the ductor roller - a basic condition of good printing results.

order brochure



ink.trac
The patented ink.trac has been developed as a highly integrated solution for the central, fully automated filling of ink ducts on sheet-fed offset presses.

The compact device integrates all components of the ink level control:
the control system with display and control panel, the sensor, the ink valve and the ink distributor pipe with special low-drip ink outlets.

It is consequently very easy to install.

Only the supply lines for electricity, compressed air and ink need to be connected up to the ink.trac.

This is a genuine plug & play concept of modern design, for discerning users. Faults are signalled via a flash lamp and reported optionally to the tecon computer; or to a central alarm unit.

If you require an individual solution, then we will develop it with you. Just contact us for details.


order brochure