auto.fill / multi.fill
These two systems are also fully automatic ink duct filling devices. A sensor is fitted onto the ink filling tube monitoring the ink level in the ink duct.

If the ink level falls below the target level, the ink valve is opened until the ink reaches the level again. auto.fill operates on the basis of a press-specific target ink level, permanently programmed into the sensor.




The customer can adjust this value if necessary with the aid of a sensor programming device, if necessary.

Faults are signaled centrally via a flash lamp as standard, and also reported to a central alarm unit as an option.

The tecon computer is used for displaying the operating status and adjusting the ink level on the multi.fill. Unlike the auto.fill, the multi.fill thus provides greater scope for adjustments and thus greater operator convenience.

If you require an individual solution, then we will develop it with you. Just contact us for details.


order brochure