Search
technotrans tooling industry
technotrans Dosiersystem

Mixing and dosing systems for cooling lubricants

Precise base for difficult applications

The fluidmix operates hydrodynamically using water pressure from the water supply, eliminating any need for electrical energy. The system is connected directly to the water supply and draws the additive straight from a container.

The concentration can be easily adjusted from the outside by simply turning the suction cylinder and reading off a scale. The additive volume is always in proportion to the amount of water flowing through the upper drive component and not affected by the pressure and through put fluctuations.

Alongside the standard version for dampening solutions of 1–5% of volume there are also versions to give 0.5-2.5% of volume, 2–12% of volume or 3–20% of volume. Beyond stand-alone models there are also integrated solutions available.

The dosing system fluidmix has been proven in over 60.000 installations worldwide.

  • KSS mixer - manual operation

    Equipment & options:

    • fully automatic mixing system for integration in a water pipe
    • for mixing liquid additives
    • adjustment of the concentration at the dosing cylinder with outer scale
    • manual ball valve to open water supply
    • optical-mechanical flow monitoring
    • plastic clip for wall mount

    Technical data:

    • setting range: 1 - 5% or 2 - 12%
    • mixing range: 100 - 1000 l/h
    • additive viscosity: 1 - 20 mPa s
    • required water pressure: 1 - 5 bar
  • fluidmix.l - with level sensor

    Equipment & option:

    • full automatic mixing system for integration in a water supply pipe
    • for mixing liquid additives
    • adjustment of the concentration at the dosing cylinder with outer scale
    • electric interface for external demand, e.g. external tank probe
    • electric valve for automatic opening of the water pipe
    • console for wall mount

    Technical data:

    • adjustment range: 1 - 5% or 2 - 12%
    • mixing rate: 100 - 1000 l/h
    • additive viscosity: 1 - 20 mPa s
    • required water presssure: 1 - 5 bar
  • fluidmix.t - with storage tank

    Equipment & options:

    • fully automatic mixing system with supply tank as buffer
    • for mixing watery solutions by dosing liquid additives
    • adjustment of the concentration of the dosing cylinder with outer scale
    • supply of several consumers via integrated feed pump
    • suction lance with empty signal

     Technical data:

    • Setting range: 1 - 5% or 2 - 12%
    • mixing rate: 100 - 1000 l/h
    • additive viscosity: 1 - 20 mPa s
    • required water pressure: 1 - 5 bar